Rail traffic with high-speed trains and welded rails call for efficient, high-precision cutters. Because welded rails are subject to considerable tension as the temperature fluctuates, every cut has to be at a perfect right angle if the rail is to withstand the stresses involved and avoid displacement or failure. The same applies to the isolating joints which separate whole sections of rail for automatic signalling purposes, letting the system know the train’s exactly location. Rail cutting and welding operations must be done quickly, often between trains, to avoid delays. The K 1250 Rail is equipped with the RA 10 attachment, which fastens to the rail to ensure a perfect right-angle cut.

 

Equipped with RA 10 The K 1250 Rail is equipped with the RA 10 attachment, which fastens to the rail to ensure a perfect right-angle cut.	Active Air Filtration™ The Active Air Filtration™ has been upgraded with a redesigned paper filter, for even better dust control.
SmartCarb™ Built-in automatic filter compensation, maintains high power and lowers fuel consumption.	EasyStart Ensures 50% easier starting by reducing the compression in the cylinder during starting.

Sealed transmission reduces the wear and slippage risk. Self-lubricating clutch bearings for extended work life. Easy-adjust blade guard Replaceable arbor bushing One of the market’s most powerful rail cutters. Capacity for 400 mm blade. Equipped with double attachment mountings, to allow cutting from both directions. Fast, stable mounting of the attachment on the rail. Exact, right-angle cuts on all planes. Chromium-plated, heat-resistant blade guard which reduces slag build-up.