HIKOKI 18V / 36V Multivolt Li-Ion Cordless Combo Kit-8pce

SKU
KC18D8PCECSTM3
In stock
$1,899.00
-
+

Kit Includes:

  • DV18DC Impact (Hammer) Driver Drill
  • WH18DC Impact Driver
  • CV18DBL Multi Tool
  • M1808DA Trimmer/Router
  • C1806DB 165mm Circular Saw
  • CR18DA 18V Reciprocating Saw
  • UB18DJL Worklight & Torch
  • R18DTB Vacuum Cleaner
  • 2 x BSL36A18 MultiVolt Batteries
  • UC18YSL3 Rapid Charger
  • Large Site Bag
 
HiKOKI 18V Brushless Impact (Hammer) Driver Drill DV18DC(H4Z)

This product is an 18V cordless impact driver drill that is maximum torque of 140Nm with 13mm chuck.

Equipped with a 22-stage clutch and drill mode, it can be used wood drill, steel drill, steel cores drill, masonry drill and tightening screws of various sizes.

In addition, the drastically downsized, RFC-equipped, and improved side handle improve workability.

Features:

  • Increased performance to a maximum torque of 140Nm makes heavy-load work much easier
  • Due to the highly durable design that is resistant to heat generation, it is difficult to stop even during continuous work
  • Reduce twisting of the driver drill with RFC (Reactive Force Control)
  • The side handle can be mounted in 11 different positions to improve workability
SPECIFICATIONS:
Voltage 18 V
Motor Type Brushless
Switch type Trigger
Drill chuck type Keyless metal chuck
Chuck capacity 1.5 - 13 mm
Light LED White
Clutch stages 22 (Torque 1.5 - 8.0 Nm)
Maximum Torque Hard Joint 140 Nm
Maximum Torque Soft Joint 70 Nm
No load speed - low 0 - 500 rpm
No load speed - high 0 - 2000 rpm
No load impact rate 0 - 30,000 ipm
Capacity: Brick & Masonry 22 mm
Capacity: Steel & Aluminium 16 mm
Capacity: Wood - hole saw 102 mm
Capacity: Wood - self feed bit 80 mm
Capacity: Small Machine Screw M6
Capacity: Wood Screw M12 x 100 mm
Dimensions (L x W x H) 190 x 267 x 89 mm
Weight (with Battery) 2.8 kg

 

HiKOKI 18V Brushless Trimmer/Router MR1808

Features:

  • Variable speed control
  • Easy access ON/OFF switch
  • Safety switch operation
  • LED light

Specifications:

  • Voltage: 18V
  • Collet cone capacity: 6.35mm
  • No load speed: 10,000 - 30,000 min-1
  • Type of motor: DC brushless motor
  • Dimensions (L x W x H): 109mm x 100 mm x 229mm
  • Weight 1.7kg
  • Includes: 23mm wrench, Straight guide assembly, Duct adaptor, Template guide M12, Trimmer guide set, Collet cone 6.35mm

HiKOKI 18V Brushless Impact Driver WH18DC(H4Z)

Features:

  • Compact and easy to use with a 114mm long in head length
  • Highly visible 3-LED lights to improve visibility of the work in a dark workplace
  • Triple hammer anvil reduces vibration and “cam-outâ€�
  • 5 tightening modes: Soft mode for small screws, Power mode for wood screws, Bolt mode for bolts, Bolt mode (single)
    for small bolts & Self drilling mode for self drilling screws
  • Conforming to IP56 (dust and water resistant)
  • Compatible with the HiKOKI MultiVolt and 18V slide batteries
SPECIFICATIONS:
Voltage 18 V
Motor Type Brushless
Switch type Variable speed trigger switch
Capacity - Small screw 4 - 10 mm
Capacity - Ordinary screw 5 - 18 mm
Capacity - High-tension bolt 5 - 14 mm
Capacity - Self drilling screw 3.5 - 6 mm
Maximum Tightening torque 210 Nm
No-load rotation speed - Soft 0 - 900 rpm
No-load rotation speed - Power 0 - 3,400 rpm
No-load rotation speed - Bolt 0 - 2,900 rpm
No-load rotation speed - Self-drilling screw 0 - 3,700 rpm
Impact rate - Soft 0 - 1,900 ipm
Impact rate - Power 0 - 4,000 ipm
Impact rate - Bolt 0 - 4,000 ipm
Impact rate - Self drilling screw 0 - 2,100 ipm
No-load sound pressure level 74.8 dB
Dimensions (L x H) 114 x 241 mm
Weight 1.6 kg

 

HiKOKI 18V 1/2" Brushless Impact Wrench WR18DBDL2(H4Z)

Features:

  • 305 Nm Max Tightening Torque providing high power for the toughest jobs.
  • 4 step tightening mode selector in order to suit various applications: High mode, medium mode, low mode and single mode.
  • Brushless motors provide increased power, performance, durability and longer battery run time per charge to handle bigger workloads with less downtime.
  • Smooth socket changes with friction ring anvil making it easier to install a pin and o-ring to securely lock the socket in place.
  • Electronic switches are more efficient in transferring energy and only require half the pull force of conventional switches.
  • Exceptional ergonomics with well-balanced weight distribution ensures less user fatigue and greater work efficiency with the centre of gravity positioned at the middle finger of the grip hand.
  • Multi-function ultra-bright LED light allows the user to select between trigger co-ordinated with afterglow or ON/OFF switch.
SPECIFICATIONS:
Capacity Bolt - M10 - M20
High tension bolt - M10 - M16
No load speed High Mode - 0 - 2,700 (min-1)
Medium mode - 0 - 2,000 (min-1)
Low mode - 0 - 1,000 (min-1)
Single Mode - 0 - 2,700 (min-1)
Impact rate 0 - 3,600 (min-1)
Max. Torque 305 Nm
Drive 12.7 mm square drive
Weight 1.8 kg (with battery)
Head Length 145 mm

 

HiKOKI 18V Brushless Multi Tool with Accessories CV18DBL(H4Z)

Features:

  • Auto Mode (Auto Variable Speed Mode) The CV18DBL is equipped with two modes :
    • 1) Standard Mode: The user can change the vibration frequency between 6,000 to 20,000 min-1 by adjusting the variable speed dial from "1" to "5".
    • 2) Auto Mode: Depending on the workload, Auto Mode "A" will automatically change the vibration frequency when under load from 15,000 min-1 up to 20,000 min-1. This has the effect of increasing battery runtime whilst reducing noise and lowering vibration prior to and during operation.
  • Tool less blade change enables quick and easy accessory replacement
  • Constant speed control maintains the speed under load ensuring maximum power is delivered to the application
  • Brushless motors are 30% more efficient than conventional models as no energy is wasted through brush friction thus extending battery run time
  • Ergonomic soft grip handle for increased user comfort and significantly reduced weight and size
  • Oscillating Interface System (OIS) attachment system accepts all OIS and universal accessories & attachments
SPECIFICATIONS:
Standard Mode Variable Speed 6,000 - 20,000 (min-1)
Auto Mode Speed (Load) 20,000 (min-1)
Auto Mode Speed (No Load) 15,000 (min-1)
Weight 1.9 kg
Length 307 mm

 

HiKOKI 18V Brushless 125mm Angle Grinder with Slide Switch G1813DA(H4Z)

Features:

  • Grip circumference 146mm
  • Detachable filter as standard
  • Side handle can be mounted in 2 directions
  • An improved dustproof structure at the rear of the grinder and installing a highly dustproof and water-resistant switch has improved the grinders durability against dust and water
  • Safety functions - Brake Function, Kick Back Protection System, Soft Start, 0 Voltage Restart Protection & Overload Protection
SPECIFICATIONS:
Voltage 18 V
Motor Type Brushless
Switch type Slide
Brake Function Yes
0 Voltage Restart Protection Yes
Soft Start Yes
Overload Protection Yes
Overheat Protection Yes
Kick Back Protection System Yes
Changeable dust filter Yes
Spindle Lock Yes
2 position side handle Yes
Grinding Wheel 125 mm
Grinding Wheel bore 22.23 mm
Spindle thread M14 x 2 mm
Maximum power output 750 W
No load speed 8,000 rpm
Dimensions (L x W x H) 358 x 141 x 139 mm
Weight (with Battery) 1.7 kg

 

HiKOKI 18V Brushless 165mm Circular Saw C1806DB(H4Z)

Introducing the 18V 165mm Brushless Circular Saw C1806DB(H4Z) from HiKOKI. Equipped with a high efficiency dust collection nozzle, which also improves its' cutting speed at 4,500rpm and motor tenacity. It is also lightweight at 3.3kg. It's easy to push handle is ideal for long and shallow cuts.

Features:

  • Electric brake
  • Rotation speed change over function: Power mode / Silent mode
  • 1.2 times more cutting speed 4,500rpm than the C18DBAL
  • Integrated dust collect nozzle for high dust collection efficiency
  • Easy to push handle for long & shallow cuts
  • 3.3 kg compact & lightweight body
SPECIFICATIONS:
Voltage 18 V
Motor Type Brushless
Capacity - Max. of depth cut: 90° 66 mm
Capacity - Max. of depth cut: 45° 45 mm
Capacity - Max. of depth cut: -5° 57 mm
No load speed - Power mode 4500 rpm
No load speed - Power mode 2500 rpm
Blade diameter 165 mm
Angle cutting -5° to 45°
Dimensions (L x W x H) 285 x 188 x 263 mm
Weight (with Battery) 3.3 kg

 

HiKOKI 18V Brushless Reciprocating Saw CR18DA(H4Z)

Features:

  • Compact and light weight
  • Exceptional balance easy to use
  • Tool-less blade replacement
  • Unique jigsaw blade compatibility
  • Tool-less shoe adjustment
SPECIFICATIONS:
Voltage 18 V
Capacity - Mild Steel Pipe 50 mm
Capacity - Vinyl Chloride Pipe 50 mm
Capacity - Wood 50 mm
No-load speed 0 - 3,200 (min-1)
Stroke 13 mm
Length 350 mm
Weight (with battery) 1.7 kg

 

HiKOKI 18V 2 Way Worklight UB18DJL(L0Z)

Features:

  • Max illumination with 12 ultra bright white LED’s achieves impressive visibility on the jobsite
  • Long run time of up to 51 hours improving efficiency for less down time
  • Two mode function enables user to switch between torch and light mode
  • Adjustable head which pivots left-right 270 degrees in seven steps and up-down 180 degrees in five steps
  • Shoulder strap and hook for convenient portability and long term use
SPECIFICATIONS:
Voltage 18V
Illumination Torch light: 6,000 Lx
Runtime Torch light: Approx. 43 hrs High (12 LED)

 

HiKOKI 18V Blower & Vacuum Pack RB18DC(DS4Z)

Features:

  • Blower and vacuum functions
  • Variable speed control trigger allows air volume to be adjusted providing convenience for work in confined areas or where air volume adjustment is required
  • Vacuum with a dust bag
  • Grip Handle
SPECIFICATIONS:
Voltage 18 V
Air Volume 3.5 m³/min
Max Air Velocity 95 m/s
Vibration Level 2.0 m/s²
Sound Pressure Level 85 dB(A)
Weight 1.8 kg

 

HiKOKI 18V Vacuum Cleaner R18DTB(H4Z)

Features:

  • High-performance suction power
  • Low noise operation
  • Inbuilt LED light
  • Ergonomic handle design for comfort
  • Dust scraper blades for easy dust disposal
  • Up to 40 minutes run-time
SPECIFICATIONS:
Voltage 18 V
Dust collecting capacity 560 ml
Suction work rate 40 W
Runtime 40 min
Maximum airflow rate 1.25 m³/min
Maximum degree of vacuum 4.5 kPa (459 mm H²O)
Dimensions (L x H) 476 x 170 mm
Weight 1.7 kg

 

HiKOKI 36V MultiVolt Battery A Slide Li-Ion (371750) BSL36A18

Features:

  • 1,080W High Power Output
  • The MULTI VOLT Lithium-ion battery, paired with MULTI VOLT 36V tools, offers unprecedented cordless power over 1,000 W with its size and weight.
  • The MULTI VOLT battery is designed for full compatibility with the current 18V slide range, and automatically changes between 2 voltages, 36V 2.5Ah and 18V 5.0Ah, according to the tool used.
  • *Compatible with MULTI VOLT 36V tools only.
  • Remaining Battery Indicator - Displays the charging state in four stages.
  • Compact & Lightweight - The MULTI VOLT battery has almost the same size and weight of a 18V battery, and produces the power of a 36V.
  • Not compatible with the existing 36V products that are compatible with BSL3620, BSL3625, BSL3626 or BSL3660.
SPECIFICATIONS:
Voltage & Capacity 36V 2.5Ah and 18V 5.0Ah
Cooling System Yes
Dimensions 116 x 69 x 76 mm
Charging Time Approx. 32 mins (with UC18YSL3)
Compatible Products All existing 18V slide-type tools
MULTI VOLT 36V tools
Compatible Chargers All chargers compatible with slide-type Lithium-ion batteries

 

HiKOKI 14.4 - 18V Li-Ion Rapid Cooling Charger with USB Port UC18YSL3(H0Z)

Features:

  • Cooling feature helps cool battery during charging or before charging commences to prevent battery overheating ensuring extended battery life
  • Preventative mechanism against charging a hot battery to extend battery life
  • 3 way overcharge protection system to ensure battery is not overcharged
  • Two colour indicator light to indicate what stage of charging the battery is in
SPECIFICATIONS:
Capable of charging 14.4V and 18V slide style Li-ion batteries
 
More Information
Bonus Type Redemption
Bonus Description BONUS REDEEM FREE BONUSES (REFER IMAGES)
Bonus Start Date 1 Sep 2022
Bonus End Date 31 Mar 2024
Write Your Own Review
You're reviewing:HIKOKI 18V / 36V Multivolt Li-Ion Cordless Combo Kit-8pce

Website Search...

  • Located on the top of every page of website in between VEK TOOLS Logo & Website phone number
  • For best results try to use key words for what you are looking for
  • Sometimes too many words will reduce the chance of finding what your looking for
  • Spelling errors will reduce the chance of finding what your looking for
  • Once selection has been searched you can refine your search from left hand menu

Website Chat...

  • Located on bottom right of website page
  • This is run by real VEK TOOLS Staff so please be patient as they could be managing 2-10 chats at the same time
  • This is service is not for tool diagrams or spare parts, contact via email prestons@vektools.com.au your request
  • Remember if you don't give us details to contact you back on we can't get back to you

Stock Levels...

  • Stock levels are not listed on website
  • We also use supplier warehouses to dispatch orders to speed up delivery or save on costs when customer isn't in Sydney
  • If out of stock we also search between supplier warehouses & also other distributor stores to fill orders

In Store Pick Up...

  • If you don't want to pay for delivery or need your item/s ASAP, you can select pick up in store option in check out. Just bear in mind not all stores will have everything in stock & your order might need to be transferred from another store or supplier. Nominated store will contact you once order is in & ready for pick up. 
  • For urgent pick ups please call 02 9756 3464 to confirm store stocks & ensure order is processed as a priority order

Order Processing...

  • Our online team will usually have your order processed within the next 2-4hours(During Business Hours) 
  • Once order is processed we will send an update through the online portal updating rough delivery times.Please ensure you check your spam or junk mail folders as with current filters sometimes order update emails are blocked or filed into those folders
  • Orders placed before 1pm during working days will usually be dispatched by the 3pm pick up 
  • For urgent orders please don't hesitate to contact us on 02 9756 3464 so we can try make sure order is able to cover your expectations

Shipping...

  • Unlike others we try run a flat rate service for our online orders, most times this is achievable & on occasions it can't be we will notify the best possible rate so you can choose whether you would like to proceed or if you would like to organise your own freight or if you would like to cancel your order. Refunds will be processed immediately.
  • For items under 1kg & could fit in a shoe box size box you may select $10 local sydney metro freight rate even if your not in that location 

LOCAL SYDNEY METRO

  • For Sydney metro areas we offer flat rate of $10, some occasions to which this might not count is items longer that 1.2m or heavier than 20kgs. In these scenarios we will get in contact with you via phone or email before proceeding with order
  • Includes the City of Sydney, Waverley, Randwick, Canada Bay, Inner West, Bayside and Woollahra local government areas. It is capped by Hornsby at the north, the Sutherland Shire at the bottom, but does not include areas like the Blue Mountains,Riverina,Illawarra,Shoalhaven, Riverina,Hunter,New England,North Coast, or the Central Coast. 

OUT OF SYDNEY METRO

  • For Areas outside the above region we offer a flat rate of $20, some occasions to which this might not count is items longer that 1.2m or heavier than 20kgs. In these scenarios we will get in contact with you via phone or email before proceeding with order

Estimated Delivery Times...

  • Orders placed before 1pm on a business day will be processed within 1-3 hours. In the unusual event of a delay to the despatch of your order you will be contacted as soon as possible. 
  • Once the order has been despatched the estimated delivery time is as follows:

              Sydney Metro 1-2 business days
              QLD,VIC,SA Metro 2-4 business days
              NT,WA,TAS Metro 3-6 business days
              Regional Areas 3-8 business days
              Remote Areas 6-10 business days

      *Please note that these estimated delivery times are estimates and are not guaranteed

Order Tracking...

  • Once order has left our warehouse tracking will usually come through to you mobile or email address
  • Direct Warehouse shipments might be delayed as we are relying on supplier warehouse to notify us

Can power tools be purchased from other countries?

  • Not recomended as the tool certification varies between different countries & in Australia tools require an Australian Compliance Approval number.
  • In Australia tools must be 240v power compliance.
  • Purchasing tools overseas will void your tool‘s warranty in Australia.

Can I plug my tool into a generator?

  • Yes you can.
  • Ensure that the generators constant out put is at least 30% more than the power tool you are running off it
  • If running more than one tool make sure combined tool wattage is less than the constant out put of the generator by at least 30%

Can power tools be purchased from other countries?

  • Not recomended as the tool certification varies between different countries & in Australia tools require an Australian Compliance Approval number.
  • Purchasing tools overseas will void your tool‘s warranty in Australia.
  • Tools from overseas can not be claimed on tax or depreciated over three years as they are not incurring GST
  • In then event of injury caused by tool your public liabilty insurance policy will be void.

What can I do to maintain my power tool?

  • Keep the tool relatively clean and free from debris.
  • Try to use a blow gun to blast any dust and fragments from the unit occasionaly.
  • Regularly check the carbon brushes if your tool has brushes, there are now tools that run on brushless technology Carbon brushes are a component in all power tools that wear with use, and should be replaced when they wear down to a marked point
  • Both carbon brushes should be replaced at the same time, and should be identical. Once they are replaced, run the tool with no load for 1 minute to ‘break in’ the brushes. Use accessories that are sharp & of a high quality grade to avoid extra load on tool.
  • Select the correct gear for the application to releave overloading tool.
  • Let the tool do the work without extra force.

What’s that burning smell?

  • If you encounter a burning smell when using a power tool of any sort, it means that the motor is being over loaded and is overheating. Specifically, the motor’s internal fan (air radiator) can’t cool the motor’s windings fast enough and their varnish coating begins to melt & burn. If you start to smell this ‘electrical burning smell’, withdraw the machine from the work but keep it running. This will enable the impeller fan to cool the motor’s windings.This smell is generally an indication that the tool isn’t being used correctly, or that it is attempting to perform a task that it isn’t capable of.
  • If this does occur & performance of the tool has changed please ensure you get the tool to our inhouse service department to completely check before more damage is caused.

How can I ensure I don’t overload my power tool?

  • Use the right tool for the job
  • Using one or more pilot drills
  • Taking smaller cuts and multiple passes over the material
  • Using cutting and cooling lubricants
  • Using quality, sharp accessories
  • Slowing down the speed or changing to a lower gear
  • Letting the power tool do the work and not forcing it
  • Regularly clearing wood chips, debris & swarf

My power tool isn’t functioning properly, what do I do?

  • If your tool is still under its warranty, then all you have to do is to take it back to our inhouse service department with your proof of purchase (Tax invoice), and we will assess it and give you a solution.
  • If it is not under warranty, then you can take it to a local service agent or our inhouse service department and they will give you a quote to repair it.

I have lost my power tool’s instruction manual. Where can I get a replacement?

  • Most suppliers will have a library of instruction manuals on their website available for you to download.
  • If you find these are not available online, call the manufacturer as they will have them.

If for some reason your not sure please always check instruction manual of tool or contact your nearest store for advice & assistance.

How do I get the best run time & life out of my cordless tools?

  • Always keep the battery’s contacts/terminals clean and from coming into contact with metal or moisture 
  • Store the batteries in a cool, dry place & dont leave in sun for long periods(eg, on metal roof or rear of ute/truck) 
  • Use accessories that are sharp & of a high quality grade to avoid extra load on cordless tool 
  • Select the correct gear for the application to releave over current draw on batteries
  • Let the tool do the work without extra force 
  • On Cordless Drills when tightening the chuck always use hand not machine to close the jaws 

Can I use a different battery in my cordless tool?

  • Most cordless tool will only be able to operate off a single voltage, there are some tools that will run dual voltage please check your instruction manual before you attempt or call our customer service to check
  • Some Cordless tools can run on batteries with different capacities (amp-hour values). Note: if your tools are made to run on 3ah they might not run on a 1.5ah battery or it might prematurely wear the 1.5ah battery 
  • Some manufacturers/brands do not change their style of battery fitment & are reverse compatible between battery chemistries (eg a Li-ion battery may be able to be fitted to a NiCd tool). If this is the case with your cordless tool, ensure your charger can charge the both battery types of chemistry.

How long will a battery’s charge last?

  • This will vary on many factors such as:the condition of the battery, the battery’s voltage & Amp Hour, speed ratings of the tool, the tool’s gearing, the application, the tools accessory and the efficiency of the cordless tool.
  • A good test is when you buy a new tool to fully charge the battery & time how long it takes to fully drain, so in the future you will be able to compare condition of battery to your test results

Can I leave my batteries on the charger when I’m not using them?

  • This isn’t a good idea & could harm the battery or charger.
  • On some charges it will overcharge the batteries after the nominal charging time has expired.
  • Always charge the batteries in a safe enviroment away from the chances of being bumped or dropped whilst charging

Can cordless tools be purchased from other countries?

  • Not recomended as the tool certification varies between different countries & in Australia tools require an Australian Compliance Approval number.
  • Purchasing tools overseas will void your tool‘s warranty in Australia.
  • Tools from overseas can not be claimed on tax or depreciated over three years as they are not incurring GST
  • In then event of injury caused by tool your public liabilty insurance policy will be void 

Can I plug my charger into a generator?

  • Tool battery chargers should not be plugged into a generator.
  • If you have to make sure the generator is an Invertor Generator or Single Sign Wave Generator
  • There are some chargers available that can handle the surges in voltage and current that generators produce – If this is the case it will be specified by the charger’s manufacturer in the manual.

What can I do to maintain my cordless tool?

  • Keep the tool relatively clean and free from debris.
  • Try to use a blow gun to blast any dust and fragments from the unit occasionaly.
  • Regularly check the carbon brushes if your tool has brushes, there are now tools that run on brushless technology Carbon brushes are a component in all power tools that wear with use, and should be replaced when they wear down to a marked point
  • Both carbon brushes should be replaced at the same time, and should be identical. Once they are replaced, run the tool with no load for 1 minute to ‘break in’ the brushes.
  • Use accessories that are sharp & of a high quality grade to avoid extra load on cordless tool 
  • Select the correct gear for the application to releave over current draw on batteries
  • Let the tool do the work without extra force 

What’s that burning smell?

  • If you encounter a burning smell when using a power tool of any sort, it means that the motor is being over loaded and is overheating. Specifically, the motor’s internal fan (air radiator) can’t cool the motor’s windings fast enough and their varnish coating begins to melt & burn. If you start to smell this ‘electrical burning smell’, withdraw the machine from the work but keep it running. This will enable the impeller fan to cool the motor’s windings.
  • This smell is generally an indication that the tool isn’t being used correctly, or that it is attempting to perform a task that it isn’t capable of.
  • If this does occur & performance of the tool has changed please ensure you get the tool to our inhouse service department to completely check before more damage is caused

How can I ensure I don’t overload my cordless tool?

  • Using one or more pilot drills
  • Taking smaller cuts and multiple passes over the material
  • Using cutting and cooling lubricants
  • Using quality, sharp accessories
  • Slowing down the speed or changing to a lower gear
  • Letting the drill do the work and not forcing it
  • Regularly clearing wood chips, debris & swarf

My cordless tool isn’t functioning properly, what do I do?

  • If your tool is still under its warranty, then all you have to do is to take it back to our inhouse service department  with your proof of purchase (Tax invoice), and we will assess it and give you a solution.
  • If it is not under warranty, then you can take it to a local service agent or our inhouse service department and they will give you a quote to repair it.

I have lost my cordless tool’s instruction manual. Where can I get a replacement?

  • Most suppliers will have a library of instruction manuals on their website available for you to download.
  • If you find these are not available online, call the manufacturer as they will have them

If for some reason your not sure please always check instruction manual of tool or contact your nearest store for advice & assistance.

Which types of tools use compressed air? 

The most common air tools are paint sprayers, air wrenches, air sanders, nail guns and air drills.

What are the advantages of using air tools?

  • Air tools provide a lot more force than power tools driven by electric motors.
  • Air tools have fewer moving parts and no electric motor to wear out making them more durable than power tools or cordless tools.
  • Air tools can be used where tools creating spark can't such as service stations or other areas with highly flammable product enviroments 
  • Their durability and simplicity make them ideal for extended use in large-scale construction projects and in commercial factory work applications.

What extra equipment do I need to use air tools?

  • To operate air tools, you will need a compressed air source, filtration and safety gear.
  • Ensure that air compressor has a filter & air regulator
  • Always wear goggles and any other safety gear specified by the air tool and air compressor safety instructions.

What can I do to maintain my air tool?

  • Run the air tool at the right pressure
  • Always have a clean air source by having the appropriate filtration to remove water from air lines
  • Oil air tools regurlarly with quality air tool oil as per instruction manual of tool
  • Use accessories that are sharp & of a high quality grade to avoid extra load on the air tool 

How much air pressure is needed to operate an air tool?

  • Most air tools will need at least 70psi (pounds per square inch) to operate.
  • Most air tools will have markings or stickers on tool to stipulate max pressure 
  • Always check the instructions that come with your air tools and adjust the air compressor to fit the specifications.

I have lost my air tool’s instruction manual. Where can I get a replacement?

  • Most suppliers will have a library of instruction manuals on their website available for you to download.
  • If you find these are not available online, call the manufacturer as they will have them

If for some reason your not sure please always check instruction manual of tool or contact your nearest store for advice & assistance.

 

Hosted By Magento Clusters