Kit Includes:
- 1 x MILWAUKEE 18V FUELâ„¢ 13mm Hammer Drill/Driver Skin M18FPD30
- 1 x MILWAUKEE Contractor Bag
- 1 x MILWAUKEE 18V FUELâ„¢ 1/4" Hex Impact Driver Skin M18FID30
- 1 x MILWAUKEE 18V FUELâ„¢ Brushless 125mm Angle Grinder w. Deadman Paddle Switch Skin M18FAG125XPD-0
- 1 x MILWAUKEE 12V/18V Multi Voltage Rapid Charger M12-18FC
- 1 x MILWAUKEE 18V FUELâ„¢ 26mm SDS Plus Rotary Hammer Skin M18FH-0
- 3 x MILWAUKEE 18V 5.0Ah Red Lithium-Ion Battery M18B5
The M18 FUEL 13 mm Hammer Drill Driver delivers the capability to drill large holes at high speed into the densest materials. The cordless drill is a compact design and solution, featuring AutoStop Control Mode for Enhanced Safety. The POWERSTATE Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for increased productivity. At only 175 mm in length, it provides maximum access and manoeuvrability in tight spaces. The AutoStop Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up. The REDLINK PLUS intelligence ensures maximum performance and protection from overloads, heating, and over-discharge whilst the all metal ratcheting chuck provides increased grip strength, durability, and corrosion resistance.
Features:
- POWERSTATE Brushless Motor delivers 158 Nm of Max Torque with 2,100 RPM and 33,000 BPM
- Redesigned trigger mechanism with improved fitment and smoother acceleration provides the ultimate trigger control
- Offers an enhanced safety control mode, AUTOSTOP, preventing over-rotations in bind-up situations
- New M-Clutch design enables the tool to handle a wider range of torque settings with improved drilling and fastening performance
Specifications:
- Voltage: 18V
- Chuck Type: 13mm Metal Chuck
- No load speed:
- Speed 1: 0 - 500rpm
- Speed 2: 0 - 2100rpm
- Blows per minute: 0 - 33,000bpm
- Torque: 158Nm
- Length: 175mm
- Weight: 1.5kg
Milwaukee 18V Li-ion Cordless Fuel GEN 4 1/4" Hex Impact Driver - Bare Unit Skin Only - M18FID30
The M18 FUEL 1/4" Hex Impact Driver features the POWERSTATE Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control.
REDLINK PLUS intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power.
Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.
Includes:
- 1 x Bit Holder
- 1 x Belt Clip
Features:
- Enhanced motor gives the M18FID3 0 - 4,400 IPM and 226 Nm of Max Torque
- Provides the user the ability to deliver power to more demanding applications back-to-back
- Enhanced motor delivers an improved 3,900 RPM when compared to previous generations
- Provides the user with increased range of speed to complete application fast and with minimal downtime
- Redesigned trigger mechanism with improved fitment and smoother acceleration
- Tri-LED lighting illuminating the area of work while eliminating shadows
- 4-Mode Drive Control provides users with greater control over the output speed and power
Specifications:
- Voltage: 18V
- Chuck Type: 1/4" Hex
- Maximum Torque: 226Nm
- Drive Control Speed:
- Mode 1: 0 - 1700rpm
- Mode 2: 3000rpm
- Mode 3: 3900rpm
- Mode 4: 3900rpm
- Drive Control Impacts:
- Mode 1: 0 - 1400ipm
- Mode 2: 3600ipm
- Mode 3: 4400ipm
- Mode 4: 4400ipm
- Overall Length: 113.5mm
- Weight: 1.0kg
Milwaukee 18V Li-ion Cordless Brushless 125 mm (5") Angle Grinder with Deadman Paddle Switch - Bare Unit Skin only - M18FAG125XPD-0
The M18 FUEL 125 mm (5") Angle Grinder with Deadman Paddle Switch is the next advancement in power and performance, fast cutting, and a lighter and more compact design when compared to the current model. The POWERSTATE Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL 125 mm (5") Angle Grinder with Deadman Paddle Switch includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. With tool-free accessory and guard adjustments, users will experience fast accessory changes, and less downtime, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL 125 mm (5") Angle Grinder with Deadman Paddle Switch takes cordless grinders to the next level.
Includes:
- 1 x Anti-Vibration Side Handle
- 1 x 125 mm (5") Type 27 Guard
- 1 x Type 1 Clip-On Guard
- 1 x Backing Flange
- 1 x Spanner Wrench
- 2 x Vent Clips
Features:
- Next-generation M18CAG125XPD with electronic and ergonomic upgrade\
- More compact, lightweight, and balanced design allows for more comfortable and maneuverable use
- POWERSTATE Brushless Motor provides 8,500 RPME-Clutch with kickback protection
- FIXTEC System allows 100% tool-free wheel change
- Paddle switch design provides increased comfort and ease-of-use in various positions
Specifications:
- Wheel Diameter 125 mm (5")
- Switch Type Paddle Switch
- No-Lock No Load: RPM 8,500
- Spindle: M14
- E-Clutch / Kickback Protection: Yes
- Overload Protection: Yes
- Tool-Free Guard Change: Yes
- Tool-Free Accessory Change: Yes
- Anti-Vibration Handle: Yes
Milwaukee 18V Li-ion Cordless Brushless 26m SDS Plus Rotary Hammer Drill - Bare Unit Skin Only -M18FH-0
The M18 FUEL 26 mm SDS Plus Rotary Hammer delivers fast drilling, hard-hitting performance and maximum control for productivity on the job site. Designed to achieve top performance with only moderate pressure, the rotary hammer is compatible with all M18 REDLITHIUM-ION bateries, and is optimized for use with M18 REDLITHIUM-ION HIGH OUTPUT 6.0Ah batteries (sold separately). The POWERSTATE Brushless Motor delivers users 2.7 J of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications. REDLINK PLUS Intelligence tool technology ensures maximum rotary drill performance and protects the tool from overload, overheating, and over-discharge. The MILWAUKEE M18 FUEL 26 mm SDS Plus Rotary Hammer includes AUTOSTOP Kickback Control for maximum control and enhanced safety, with the tool sensing a bind-up situation when users are drilling in rebar or hard aggregate and stopping over-rotation, without the need for the user to release the trigger, indicated by the AUTOSTOP Indicator LED. The Anti-Vibration System (AVS) minimizes vibration for maximum comfort when in use for extended periods. A
Includes:
- 1 x Side Handle with Depth Gauge
Features:
- 3 mode (Rotary Hammer, Hammer Only, and Rotary Only)POWERSTATE Brushless Motor delivers fast drilling
- 2.7 J impact energy for hard-hitting performanceAnti-Vibration System (AVS) for maximum user comfort
- AUTOSTOP Kickback Control senses bind-up and prevents over-rotation
- REDLINK PLUS Intelligence integrates full-circle communication between tool, battery, and charger to protect from overloads, over-heating, and over-discharge
- Integrated LED light for illuminating dark workspaces
- Compatible with M18 FUEL HAMMERVAC 26 mm Dedicated Dust Extractor (M18FDEX)
- Adjustable depth gauge rod for accurate hole depth
Specifications:
- Power: 18V
- Max Capacity: 26 mm
- Impact Energy: 2.7
- JRPM: 1,330BPM 4,800BPM
- Kickback Prevention: Yes
- Anti-Vibration: Yes
- Length: 296 mm
- Weight (Tool only): 3.1 kg
Milwaukee 18V 5.0Ah Li-Ion RED LITHIUM Battery - M18B5
The M18 5.0Ah REDLITHIUM-ION BATTERY features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18 5.0Ah REDLITHIUM-ION BATTERY features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops.
This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below -180C). Managed by Milwaukee’s exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.
Features:
- Powers more than 100 Milwaukee M18 cordless power tools
- REDLINK intelligence provides optimised performance and over load protection
- Best in class construction - offers long lasting performance and durability
- Fuel gauge on board displays remaining run time for less down time on the job
- All weather performance, delivers fade free power in extreme jobsite conditions
Specifications:
- Voltage: 18V
- Capacity: 5.0Ah
- Charge time:
- M12-18FC: 60 mins
- M12-18C: 105 mins
- Weight: 0.72kg
Milwaukee 12V - 18V Multi Voltage Rapid Battery Charger - M12-18FC
Once again, Milwaukee is on the ball for providing the fastest charging solutions for tradies. With the ever-growing demand to charge batteries in both voltages, the new and improved multi voltage charger, M12-18FC, can sequencial charge a 12V or 18V battery up to 40% faster, increasing your productivity on the worksite.
Features:
- Charges all Milwaukee batteries up to 40% faster
- Charges all M12 and M18 batteries
- Sequencial charging
- REDLINK intelligence communicates directly with the battery
- REDLINK monitors cell voltage and temperature
- REDLINK charges to optimise the performance, protect and extend the life of the battery
Specifications:
- Voltage: 12V & 18V
- Battery type: Li-ion
- Charge Time:
- 2.0Ah: 26 minutes
- 4.0Ah: 47 minutes
- 5.0Ah: 59 minutes
- 6.0Ah: 75 minutes
- 9.0Ah: 90 minutes
- Weight: 0.77kg
Bonus Type | Redemption |
---|---|
Bonus Description | Redeem a M18B5 18V 5.0Ah Battery for FREE! Purchases valid between 01/10/2024 - 31/12/2024 |
Bonus Start Date | 1 Oct 2024 |
Bonus End Date | 31 Dec 2024 |
Video |
Website Search...
- Located on the top of every page of website in between VEK TOOLS Logo & Website phone number
- For best results try to use key words for what you are looking for
- Sometimes too many words will reduce the chance of finding what your looking for
- Spelling errors will reduce the chance of finding what your looking for
- Once selection has been searched you can refine your search from left hand menu
Website Chat...
- Located on bottom right of website page
- This is run by real VEK TOOLS Staff so please be patient as they could be managing 2-10 chats at the same time
- This is service is not for tool diagrams or spare parts, contact via email prestons@vektools.com.au your request
- Remember if you don't give us details to contact you back on we can't get back to you
Stock Levels...
- Stock levels are not listed on website
- We also use supplier warehouses to dispatch orders to speed up delivery or save on costs when customer isn't in Sydney
- If out of stock we also search between supplier warehouses & also other distributor stores to fill orders
In Store Pick Up...
- If you don't want to pay for delivery or need your item/s ASAP, you can select pick up in store option in check out. Just bear in mind not all stores will have everything in stock & your order might need to be transferred from another store or supplier. Nominated store will contact you once order is in & ready for pick up.
- For urgent pick ups please call 02 9756 3464 to confirm store stocks & ensure order is processed as a priority order
Order Processing...
- Our online team will usually have your order processed within the next 2-4hours(During Business Hours)
- Once order is processed we will send an update through the online portal updating rough delivery times.Please ensure you check your spam or junk mail folders as with current filters sometimes order update emails are blocked or filed into those folders
- Orders placed before 1pm during working days will usually be dispatched by the 3pm pick up
- For urgent orders please don't hesitate to contact us on 02 9756 3464 so we can try make sure order is able to cover your expectations
Shipping...
- Unlike others we try run a flat rate service for our online orders, most times this is achievable & on occasions it can't be we will notify the best possible rate so you can choose whether you would like to proceed or if you would like to organise your own freight or if you would like to cancel your order. Refunds will be processed immediately.
- For items under 1kg & could fit in a shoe box size box you may select $10 local sydney metro freight rate even if your not in that location
LOCAL SYDNEY METRO
- For Sydney metro areas we offer flat rate of $10, some occasions to which this might not count is items longer that 1.2m or heavier than 20kgs. In these scenarios we will get in contact with you via phone or email before proceeding with order
- Includes the City of Sydney, Waverley, Randwick, Canada Bay, Inner West, Bayside and Woollahra local government areas. It is capped by Hornsby at the north, the Sutherland Shire at the bottom, but does not include areas like the Blue Mountains,Riverina,Illawarra,Shoalhaven, Riverina,Hunter,New England,North Coast, or the Central Coast.
OUT OF SYDNEY METRO
- For Areas outside the above region we offer a flat rate of $20, some occasions to which this might not count is items longer that 1.2m or heavier than 20kgs. In these scenarios we will get in contact with you via phone or email before proceeding with order
Estimated Delivery Times...
- Orders placed before 1pm on a business day will be processed within 1-3 hours. In the unusual event of a delay to the despatch of your order you will be contacted as soon as possible.
- Once the order has been despatched the estimated delivery time is as follows:
Sydney Metro 1-2 business days
QLD,VIC,SA Metro 2-4 business days
NT,WA,TAS Metro 3-6 business days
Regional Areas 3-8 business days
Remote Areas 6-10 business days
*Please note that these estimated delivery times are estimates and are not guaranteed
Order Tracking...
- Once order has left our warehouse tracking will usually come through to you mobile or email address
- Direct Warehouse shipments might be delayed as we are relying on supplier warehouse to notify us
Can power tools be purchased from other countries?
- Not recomended as the tool certification varies between different countries & in Australia tools require an Australian Compliance Approval number.
- In Australia tools must be 240v power compliance.
- Purchasing tools overseas will void your tool‘s warranty in Australia.
Can I plug my tool into a generator?
- Yes you can.
- Ensure that the generators constant out put is at least 30% more than the power tool you are running off it
- If running more than one tool make sure combined tool wattage is less than the constant out put of the generator by at least 30%
Can power tools be purchased from other countries?
- Not recomended as the tool certification varies between different countries & in Australia tools require an Australian Compliance Approval number.
- Purchasing tools overseas will void your tool‘s warranty in Australia.
- Tools from overseas can not be claimed on tax or depreciated over three years as they are not incurring GST
- In then event of injury caused by tool your public liabilty insurance policy will be void.
What can I do to maintain my power tool?
- Keep the tool relatively clean and free from debris.
- Try to use a blow gun to blast any dust and fragments from the unit occasionaly.
- Regularly check the carbon brushes if your tool has brushes, there are now tools that run on brushless technology Carbon brushes are a component in all power tools that wear with use, and should be replaced when they wear down to a marked point
- Both carbon brushes should be replaced at the same time, and should be identical. Once they are replaced, run the tool with no load for 1 minute to ‘break in’ the brushes. Use accessories that are sharp & of a high quality grade to avoid extra load on tool.
- Select the correct gear for the application to releave overloading tool.
- Let the tool do the work without extra force.
What’s that burning smell?
- If you encounter a burning smell when using a power tool of any sort, it means that the motor is being over loaded and is overheating. Specifically, the motor’s internal fan (air radiator) can’t cool the motor’s windings fast enough and their varnish coating begins to melt & burn. If you start to smell this ‘electrical burning smell’, withdraw the machine from the work but keep it running. This will enable the impeller fan to cool the motor’s windings.This smell is generally an indication that the tool isn’t being used correctly, or that it is attempting to perform a task that it isn’t capable of.
- If this does occur & performance of the tool has changed please ensure you get the tool to our inhouse service department to completely check before more damage is caused.
How can I ensure I don’t overload my power tool?
- Use the right tool for the job
- Using one or more pilot drills
- Taking smaller cuts and multiple passes over the material
- Using cutting and cooling lubricants
- Using quality, sharp accessories
- Slowing down the speed or changing to a lower gear
- Letting the power tool do the work and not forcing it
- Regularly clearing wood chips, debris & swarf
My power tool isn’t functioning properly, what do I do?
- If your tool is still under its warranty, then all you have to do is to take it back to our inhouse service department with your proof of purchase (Tax invoice), and we will assess it and give you a solution.
- If it is not under warranty, then you can take it to a local service agent or our inhouse service department and they will give you a quote to repair it.
I have lost my power tool’s instruction manual. Where can I get a replacement?
- Most suppliers will have a library of instruction manuals on their website available for you to download.
- If you find these are not available online, call the manufacturer as they will have them.
If for some reason your not sure please always check instruction manual of tool or contact your nearest store for advice & assistance.
How do I get the best run time & life out of my cordless tools?
- Always keep the battery’s contacts/terminals clean and from coming into contact with metal or moisture
- Store the batteries in a cool, dry place & dont leave in sun for long periods(eg, on metal roof or rear of ute/truck)
- Use accessories that are sharp & of a high quality grade to avoid extra load on cordless tool
- Select the correct gear for the application to releave over current draw on batteries
- Let the tool do the work without extra force
- On Cordless Drills when tightening the chuck always use hand not machine to close the jaws
Can I use a different battery in my cordless tool?
- Most cordless tool will only be able to operate off a single voltage, there are some tools that will run dual voltage please check your instruction manual before you attempt or call our customer service to check
- Some Cordless tools can run on batteries with different capacities (amp-hour values). Note: if your tools are made to run on 3ah they might not run on a 1.5ah battery or it might prematurely wear the 1.5ah battery
- Some manufacturers/brands do not change their style of battery fitment & are reverse compatible between battery chemistries (eg a Li-ion battery may be able to be fitted to a NiCd tool). If this is the case with your cordless tool, ensure your charger can charge the both battery types of chemistry.
How long will a battery’s charge last?
- This will vary on many factors such as:the condition of the battery, the battery’s voltage & Amp Hour, speed ratings of the tool, the tool’s gearing, the application, the tools accessory and the efficiency of the cordless tool.
- A good test is when you buy a new tool to fully charge the battery & time how long it takes to fully drain, so in the future you will be able to compare condition of battery to your test results
Can I leave my batteries on the charger when I’m not using them?
- This isn’t a good idea & could harm the battery or charger.
- On some charges it will overcharge the batteries after the nominal charging time has expired.
- Always charge the batteries in a safe enviroment away from the chances of being bumped or dropped whilst charging
Can cordless tools be purchased from other countries?
- Not recomended as the tool certification varies between different countries & in Australia tools require an Australian Compliance Approval number.
- Purchasing tools overseas will void your tool‘s warranty in Australia.
- Tools from overseas can not be claimed on tax or depreciated over three years as they are not incurring GST
- In then event of injury caused by tool your public liabilty insurance policy will be void
Can I plug my charger into a generator?
- Tool battery chargers should not be plugged into a generator.
- If you have to make sure the generator is an Invertor Generator or Single Sign Wave Generator
- There are some chargers available that can handle the surges in voltage and current that generators produce – If this is the case it will be specified by the charger’s manufacturer in the manual.
What can I do to maintain my cordless tool?
- Keep the tool relatively clean and free from debris.
- Try to use a blow gun to blast any dust and fragments from the unit occasionaly.
- Regularly check the carbon brushes if your tool has brushes, there are now tools that run on brushless technology Carbon brushes are a component in all power tools that wear with use, and should be replaced when they wear down to a marked point
- Both carbon brushes should be replaced at the same time, and should be identical. Once they are replaced, run the tool with no load for 1 minute to ‘break in’ the brushes.
- Use accessories that are sharp & of a high quality grade to avoid extra load on cordless tool
- Select the correct gear for the application to releave over current draw on batteries
- Let the tool do the work without extra force
What’s that burning smell?
- If you encounter a burning smell when using a power tool of any sort, it means that the motor is being over loaded and is overheating. Specifically, the motor’s internal fan (air radiator) can’t cool the motor’s windings fast enough and their varnish coating begins to melt & burn. If you start to smell this ‘electrical burning smell’, withdraw the machine from the work but keep it running. This will enable the impeller fan to cool the motor’s windings.
- This smell is generally an indication that the tool isn’t being used correctly, or that it is attempting to perform a task that it isn’t capable of.
- If this does occur & performance of the tool has changed please ensure you get the tool to our inhouse service department to completely check before more damage is caused
How can I ensure I don’t overload my cordless tool?
- Using one or more pilot drills
- Taking smaller cuts and multiple passes over the material
- Using cutting and cooling lubricants
- Using quality, sharp accessories
- Slowing down the speed or changing to a lower gear
- Letting the drill do the work and not forcing it
- Regularly clearing wood chips, debris & swarf
My cordless tool isn’t functioning properly, what do I do?
- If your tool is still under its warranty, then all you have to do is to take it back to our inhouse service department with your proof of purchase (Tax invoice), and we will assess it and give you a solution.
- If it is not under warranty, then you can take it to a local service agent or our inhouse service department and they will give you a quote to repair it.
I have lost my cordless tool’s instruction manual. Where can I get a replacement?
- Most suppliers will have a library of instruction manuals on their website available for you to download.
- If you find these are not available online, call the manufacturer as they will have them
If for some reason your not sure please always check instruction manual of tool or contact your nearest store for advice & assistance.
Which types of tools use compressed air?
The most common air tools are paint sprayers, air wrenches, air sanders, nail guns and air drills.
What are the advantages of using air tools?
- Air tools provide a lot more force than power tools driven by electric motors.
- Air tools have fewer moving parts and no electric motor to wear out making them more durable than power tools or cordless tools.
- Air tools can be used where tools creating spark can't such as service stations or other areas with highly flammable product enviroments
- Their durability and simplicity make them ideal for extended use in large-scale construction projects and in commercial factory work applications.
What extra equipment do I need to use air tools?
- To operate air tools, you will need a compressed air source, filtration and safety gear.
- Ensure that air compressor has a filter & air regulator
- Always wear goggles and any other safety gear specified by the air tool and air compressor safety instructions.
What can I do to maintain my air tool?
- Run the air tool at the right pressure
- Always have a clean air source by having the appropriate filtration to remove water from air lines
- Oil air tools regurlarly with quality air tool oil as per instruction manual of tool
- Use accessories that are sharp & of a high quality grade to avoid extra load on the air tool
How much air pressure is needed to operate an air tool?
- Most air tools will need at least 70psi (pounds per square inch) to operate.
- Most air tools will have markings or stickers on tool to stipulate max pressure
- Always check the instructions that come with your air tools and adjust the air compressor to fit the specifications.
I have lost my air tool’s instruction manual. Where can I get a replacement?
- Most suppliers will have a library of instruction manuals on their website available for you to download.
- If you find these are not available online, call the manufacturer as they will have them
If for some reason your not sure please always check instruction manual of tool or contact your nearest store for advice & assistance.